A mop is a textile mounted on a handle used in cleaning. It is generally used for cleaning floors Floor cleaning is a major occupation throughout the world. The main job of most cleaners is to clean floors.
The inventor Eddy Key received a patent for a mop holder in 1837. [1]
Contents |
Types of mops
Classic yarn mop for wet use
A classic round yarn mop for wet useIn daily speech a mop is used in reference to a yarn Yarn is a long continuous length of interlocked fibers, suitable for use in the production of textiles, sewing, crocheting, knitting, weaving, embroidery and ropemaking. Thread is a type of yarn intended for sewing by hand or machine. Modern manufactured sewing threads may be finished with wax or other lubricants to withstand the stresses involved mop. The mop (eye) consists of thick lengths of yarn (about 25 cm) or, in newer models, soft strands of water-absorbing fabric or Wettex. A yarn mop is usually mounted on a long (about 1.5 m) handle with a thread end on which the mop can be fastened by turning it clockwise.
To clean a floor, the mop is soaked in a bucket A bucket, also called a pail, is a watertight, vertical cylinder or truncated cone, with an open top and a flat bottom, usually attached to a semicircular carrying handle called the bail. Their main purpose is the carrying of water, but they may also have other purposes. Elaborate ceremonial or ritual buckets in bronze, ivory or other materials of water, into which some cleaning solution has usually been added, and swept against the floor surface. Some buckets include a wringer to strain excess water from the mop, to control the amount of water transferred to the floor. Leaving excess (contaminated) water on the floor will result in a dirty residue.
Dry-mop, dust-mop
Flat mop for dry or wet (pre-moisting) use. Open end yarn with microfiber Microfiber or microfibre refers to synthetic fibers that measure less than one denier. The most common types of microfibers are made from polyesters, polyamides (nylon), and or a conjugation of polyester and polyamide. Velcro Velcro is a brand name of fabric hook-and-loop fasteners. It consists of two layers: a "hook" side, which is a piece of fabric covered with tiny hooks, and a "loop" side, which is covered with even smaller and "hairier" loops. When the two sides are pressed together, the hooks catch in the loops and hold the pieces back.A dry-mop or dust-mop is designed to pick up dry, loose contamination like dust, earth and sand from the surface. It consists of yarn and/or microfiber Microfiber or microfibre refers to synthetic fibers that measure less than one denier. The most common types of microfibers are made from polyesters, polyamides (nylon), and or a conjugation of polyester and polyamide and is used as a first step in cleaning a floor.
Professional dry mops consist of a flat sheet of micro fiber textile or sheets with a surface of looped yarn, usually about 15 cm wide, and comes in variable lengths (usually 30 - 100 cm).
The dry-mop can in many instances replace a broom and has the ability to hold a limited amount of dust or sand within itself. Ideally, it should be machine washed when it becomes saturated with dust. Another option is using a vacuum cleaner to suck surface dust away from the mop, however this is limited in its effectiveness.
Single-use dry-mops are available.
Wet-mop, moist-mop
A wet mop or moist mop is, in professional cleaning, used as a second step in the cleaning of a surface. The wet mop is swept over the surface to dissolve and absorb fat, mud and dried-in liquid contaminations.
Professional wet-mops consists of a flat sheet of microfiber textile or sheets with a surface of looped yarn (which might contain microfiber as well), usually about 15 cm wide, and comes in variable lengths (usually 30 - 100 cm).
|
Flat wet-mop (pre-moisting). Looped microfiber with velcro mounting on back. |
Flat wet-mop (back view of previous mop). |
Flat mop for dry or wet (pre-moisting) use. Open-end microfiber with looped yarn edges. Velcro back. |
Mops for pre-moisting
Manual pre-moisting of wet-mops in bucket.Professional flat mops are made for pre-moisting. Mops are pre-impregnated with an ideal amount of water mixed with an appropriate amount detergent. This means that the cleaner does not need to bring any additional water on the cleaning trolley. This ideal amount is often recommended by the manufacturer in terms of weight percent of water per weight of the dry mop, for example "175% water per weight of the dry mop".
Mops for pre-moisting are flat sheets of (often microfiber Microfiber or microfibre refers to synthetic fibers that measure less than one denier. The most common types of microfibers are made from polyesters, polyamides (nylon), and or a conjugation of polyester and polyamide) textile, usually about 15 cm wide, and comes in variable lengths (usually 30 - 100 cm). Mops for pre-moisting is fastening on a handle with a flat pad mount with the aid of velcro Velcro is a brand name of fabric hook-and-loop fasteners. It consists of two layers: a "hook" side, which is a piece of fabric covered with tiny hooks, and a "loop" side, which is covered with even smaller and "hairier" loops. When the two sides are pressed together, the hooks catch in the loops and hold the pieces or a pouch on the mop, in which the pad on the handle fits.
Pre-moisting of mops
Pre-moisting can be done with a special washing machine or by hand by simply folding and packing the mops tight in a container and pouring the measured amount of water over them. The mops will then need about 5 - 10 min for the liquid to distribute evenly in their tissue before use.
Advantages with pre-moisting are among other:
- The cleaner does not have to have a bucket of water with him/her when sweeping the floor, but simply carries an appropriate amount of mops. This means the weight of the equipment can often be kept lower.
- The risk of over-wetting the floor and leave pools which collect dust is eliminated if the wetting is ideal.
Hot mop
The Hot mop follows a similar concept to a steam iron An iron is a small appliance used in ironing to remove wrinkles from fabric. Ironing works by loosening the ties between the long chains of molecules that exist in polymer fiber materials. With the heat and the weight of the ironing plate, the fibers are stretched and the fabric maintains its new shape when cool. Some materials such as cotton. After adding water, the water is heated to make exude on top of a floor, which can then be cleaned without using a cleaning solvent. These can work best on surfaces where a regular mop would also be used, such as floors, hearths, and laminate.
Syntho-mop
A syntho-mop such as the Scooba is not considered a mop, because even though it performs the same function as a traditional mop, the lack of hand operation makes it ineligible for status as a mop. [2]
Mop handles and mounting
Mop handles. From left: Classic yarn mop handle made of aluminium (thread mount), unadjustable aluminium handle for velcro mop (50 cm), unadjustable aluminium handle for velcro mop (60 cm), scale included for reference.A mop handle consists of a long piece of wood or aluminium tubing fitted with some kind of mount for the mop. The handle can be made for mounting a mop on it by means of:
- Screwing (as with the classic yarn mop)
- Velcro (as with many professional flat mops)
- Pouch (as with many professional flat mops)
|
Detail of mop mounting piece (blue plastic) and mount. |
Velcro mop with mount |
Working conditions
Using a mop for cleaning floors and, for example tiled walls, greatly improves the hygienic working conditions for the handler. The mop is also good at cleaning small and tight areas and can help a person really clean their house. When a mop is used, first you have to soak it in soapy water and then mop the floor with it.
See also
References
- ^ U.S. Patent 241
- ^ Scooba mop, Retrieved on 2008-10-10
Categories: Cleaning tools Categories: Tools | Domestic life | Cleaning | Floors Categories: Architectural elements | Pedestrian infrastructure
elenaerda
Wed, 16 Sep 2009 15:19:48 GM
elenaerda posted a photo: . Mop. and self. Croatia, Rovin - may 2009 -
